“Fast, efficient, clean, and extremely knowledgeable about the hardware and setup. Ed and the crew walked me through the whole system and I’ve spent hours playing with my new SPAN setup!”
The SPAN smart panel, made for the way Leander lives
Leander runs on technology — and your home’s electrical heart can too. A SPAN panel turns the breaker box into something you actually see and control: every circuit on your phone, loads balanced automatically, and a home ready for an EV, solar, and battery backup.
What a SPAN install includes
Certified SPAN Smart Panel Installation in Leander, TX — Local Utility, Permit & Warranty Summary
Leander runs on technology — and your home’s electrical heart can too. A SPAN panel turns the breaker box into something you actually see and control: every circuit on your phone, loads balanced automatically, and a home ready for an EV, solar, and battery backup. Dispatched daily from our Central Austin headquarters at 3906 N Lamar Blvd (78756) across Leander, TX, DC Electric, Inc. (TECL #38552 · Master Electrician #560625) provides upfront written flat-rate pricing before work begins, handles all PEC & Oncor and City of Leander Permits, performs formal NEC Article 220 load calculations, and backs your installation with our 10-Year Panel Workmanship Warranty (5.0★ across 526 Google reviews). Call 512.954.4782 or book online 24/7.
Your panel decides what your home can do. SPAN lets you decide too.
A breaker box hides everything; a smart panel shows it
Most homes never see where their power actually goes until the bill shows up. SPAN meters every circuit live, so for the first time you can watch — and steer — exactly how your home spends energy.
Heavy loads needn’t mean a bigger service
An EV, the AC, and the oven all going on a hot afternoon is precisely when an ordinary panel starts to strain. SPAN choreographs those loads, and it often lets you add heavy ones without stepping up to a larger service.
The home you wire today should be ready for tomorrow
Solar, a second EV, a home battery — built on top-tier hardware and software, a SPAN home makes room for what’s next instead of being torn back open for it.
Along the 183A and Ronald Reagan corridors into Leander, where newer hill-country homes carry EVs, solar arrays, and backup batteries, a traditional breaker box that hides every circuit behind a metal door feels a generation behind. A SPAN smart panel brings the heart of your Leander home up to speed.
Why Leander takes to the smart panel so naturally
The same Leander households that fill Travisso, Crystal Falls, and Bryson with EVs, solar arrays, and connected home systems want the same circuit-level intelligence at the panel. SPAN replaces your main panel with one that meters every circuit in real time, shows it all in a clean app, and lets you decide what matters — right down to which rooms keep power when it counts.
Balance an EV, the AC, and the whole house
A SPAN panel manages load the way a good conductor manages an orchestra. It can ease your EV charging up and down so a hot Leander afternoon — AC at full tilt, oven on, car plugged in — never trips the main. For many homes, that smart balancing means adding heavy loads without the larger service upgrade you’d otherwise need.
Made for backup, ready for what’s next
Paired with a Tesla Powerwall or a FranklinWH battery, SPAN decides circuit by circuit where stored power goes during an outage — so the fridge, the internet and the bedrooms stay lit far longer than a whole-home approach would allow. And because it’s built around top-tier equipment and software, the home you wire today is ready for the solar, the second EV, or the battery you add tomorrow.
Permits, handled when the project calls for them
A panel like this usually calls for a permit and an inspection. When yours does, we handle the paperwork, the scheduling, and any utility coordination — Oncor or Pedernales, whichever serves your street — quietly, as part of the work.
One clear price, before we begin
We map your circuits and what you want the home to do, then hand you one written price, settled before anything starts. Financing’s there if it makes the project easier — just ask, and we’ll walk you through it.
A smart panel is only as smart as its install
Every circuit, in your hand
Real-time monitoring of the whole home in a clean app — you see exactly where power goes and what each circuit is doing, from anywhere.
Smart load management
SPAN eases flexible loads like EV charging up and down around the rest of the home, smoothing the peaks that would trip a conventional panel.
Backup that lasts longer
Paired with a Tesla Powerwall or FranklinWH battery, SPAN directs stored power circuit by circuit — so the essentials run far longer during an outage.
Certified installation
We’re trained on the platform, so the panel is installed to spec, commissioned properly, and set up in the app before we leave.
Ready for solar and a second EV
Built with headroom and intelligence, your home takes on what’s next without another teardown.
One clear price, agreed up front
We map your circuits and goals, then hand you a single written price before any work begins.
The bar we hold every Leander job to.
We point you to the right fix, not the priciest
Our crew does the actual work and lays every option on the table, so the call that gets made is yours — and it’s the one that fits your home, not the one that fattens the invoice.So the work you approve is the work your house actually needs.
One grade of parts — the kind we’d wire into our own walls
We stock a single tier of equipment: the top-tier names we’ll stand behind for years. Bargain breakers and discount devices fail early and cost more in the end, so they never come off our truck.So what we set in your walls this year is still doing its job long after we’ve gone.
Unrushed — because hurried electrical is how homes get hurt
Nobody here is paid to move faster. We give the job the hours it truly takes, label every circuit, clean up behind us, and don’t pack the van until it’s right.So it’s done right the first time — and made right on our dime if it ever drifts.
From walk-through to app in hand
A clean, planned upgrade — not a science project.
Design consultation
We review your goals — backup, solar, EVs, the loads you run — and design the panel and circuit map around how you actually live.
Flat-price proposal
One clear number, in writing, with the equipment and scope spelled out. Permits and utility coordination are ours to handle.
Install & integration
We swap the panel, integrate your battery and solar, and bring every circuit online — clean, labeled, to code.
App setup & walk-through
We set priorities, name every circuit, and hand you a home you can run from your phone.
Thinking about solar, a battery, or a second EV? Let’s design the panel once, for all of it.
What stands behind the crew at your door.
BBB A+ Rated
Accredited with the Better Business Bureau and carrying its A+ grade.
Angi Award Winner
An Angi Award for service quality — renewed every year from 2018 through 2025.
Manufacturer-Certified
Tesla, SPAN, and the panel makers we install all vet and certify their installers — and that approval isn’t handed out freely.
5.0, One Job at a Time
Five stars across Google, Yelp, and Angi — built one finished job at a time, never bought.
Backed, and Backed in Writing
When we warranty a thing we stand on it — no loophole-hunting, no fine-print exclusions. If we installed it, it’s ours to make right.
Permits & Inspections Handled
Licensed and insured in Texas. When your job needs a permit, we pull it, file it, and meet the inspector — nothing lands on you.
We treat every Leander home like our own. Here’s what neighbors say about DC Electric.
Being invited into your home is a privilege we never take for granted. Every story below comes straight from a Greater Austin homeowner we’ve served — with the work we did and the DC Electric crew who showed up.
“Fast, efficient, clean, and extremely knowledgeable about the hardware and setup. Ed and the crew walked me through the whole system and I’ve spent hours playing with my new SPAN setup!”
“They showed up right on time and worked nonstop in the heat, provided a generator so we had power while they worked, answered every question, explained everything, and cleaned up before leaving. I’ll definitely use them again.”
“I needed to replace my panel, and add outlets to the bathroom and garage. Pete was helpful in getting my estimate. Max and Rico did a great job with the installation. Everyone was very friendly. The pricing was straightforward and fair. They had me scheduled fairly quickly and finished the job quickly.”
“Nick came out for the quote — kind and thorough, and helped me think through all the work. Install day was flawless: the crew put in a car charger, 16 can lights, and two new circuits, and insisted on making it perfect. They are not the cheapest electricians in town, but you absolutely get what you pay for.”
“I purchased a 1951 home with multiple electrical issues on the inspection. Every deficiency was addressed — and they told me which components did not need updating. A storm rolled in while I was away and the techs closed all my windows. I came home to a dry house.”
“Big thank you to Rodney, Max and Pete from DC Electric who helped us install new recessed lights in our kitchen. They were on time, super helpful working out what would work best, did a good quality install and clean up and were very friendly and easy to work with. Will definitely use again!”
“We got multiple bids to restore power to our garage unit, and the team at DC were the easy choice. Scheduling was easy, communication was consistent, and most importantly, they took care of everything thoroughly — complete on time, with no surprises.”
“Andrew and Jonathan did an amazing job installing our EV charger. They walked us through the setup, stayed true to the quote, and left the garage cleaner than they found it.”
“Rico, Rodney and Nathan were professionals with my charger install. Explained every step of the process to me, informed me of every step during the install, and walked me through final install and operation. Left a clean work space, and their final work looked very clean. Highly recommend!”
Backed in writing, top to bottom
Your SPAN hardware carries its manufacturer’s warranty, and our installation — the panel swap, the integration, the wiring — is backed by a DC Electric workmanship warranty in writing. If something we did isn’t right, we make it right.
Peace-of-mind smart panel financing.
- No payments and no interest for 3 months on installs $1,000+, paid in full during the intro
- Or keep payments low with long-term financing through GoodLeap
- Complimentary on-site evaluation — no pressure, no obligation
- Smart panel options sized to your home and how you actually use power
No payments and no interest for the first 3 months if paid in full, then low monthly payments over the term. On installs $1,000+, through GoodLeap.
*Financing provided by GoodLeap, LLC, subject to credit approval; minimum purchase $1,000. The promotional plan has no payments and no interest for the first 3 months — no interest if the balance is paid in full within the promotional period. If it is not paid in full, interest is charged from the funding date and the balance converts to a fixed-rate loan of up to 120 months at 11.49%–15.49% APR with Autopay. Payment examples are estimates; actual terms depend on the amount financed and creditworthiness. Not all applicants qualify. See financing details.
Real jobs, real homes.
A growing library of completed work across Greater Austin — and the badges we've earned along the way.
Certified SPAN Smart Electrical Panel Installation in Leander, TX (78641)
Dispatched from our Central Austin headquarters at 3906 N Lamar Blvd, DC Electric handles permitted span smart panel installation across both established neighborhoods like Old Town Leander, Block House Creek, and Mason Creek (established 1980s–1990s homes frequently ready for 200A copper-bus replacements and GFCI/grounding updates) and growing communities including Travisso, Crystal Falls, Bryson, Palmera Ridge, and Larkspur (hillside and master-planned builds adding dual EV chargers, SPAN smart panels, and architectural lighting). Every job starts with an on-site evaluation by a licensed Texas electrician (TECL #38552) and an exact flat-rate written price before any work begins.
Our office manages municipal permits through City of Leander Building Permits & Inspections and coordinates directly with Pedernales Electric Cooperative (PEC) and Oncor. See full equipment and installation ranges in our SPAN smart panel cost guide and 200-amp panel upgrade guide, explore our Leander, TX electrician hub, or compare our Austin span smart panel installation master guide and all 16 Greater Austin service areas.


Answers before you book
What does a SPAN smart panel actually do?
Can SPAN help me add an EV charger without upgrading my service?
Does SPAN work with a Tesla Powerwall or FranklinWH battery?
Is SPAN worth it if I don’t have solar yet?
Will I need a permit?
Do you offer financing?
Do your licensed electricians handle Certified SPAN Smart Panel installations near me across all Leander, TX neighborhoods?
Tell us what you need.
Tell us what you need and our office will set a clear arrival window. A licensed DC Electric electrician near you in Leander, TX evaluates your home in person and gives you one exact flat-rate price.
Request your appointment.
Our office calls to set a time that works. A licensed electrician then handles the visit — and walks you through clear options and pricing.
- A licensed electrician on site
- Clear options and pricing, explained
- Workmanship warranty, in writing
Got it — we'll be in touch.
Our office will call you to schedule your appointment.
Office
3906 N Lamar Blvd, Suite 204 AB
Austin, TX 78756
24/7 phone & online booking
Get Directions →
Phone
Hours
24/7 phone & online booking · 24/7 emergency service for existing customers
Service Area
Austin is home — the surrounding towns are family. Serving all of Greater Austin.